Make an Engraved Glass - With the Lasercutter

During this workshop you have the opportunity to engrave your own designs onto glass. At the start of the workshop there is a short introduction. Then there is time for some small optimisations of your design and do the engraving. You will work together with one other participant per lasercutter.

Please be aware that outside this workshop it is not allowed to engrave glass with the lasercutters.

Registration

This is an event for ETH students and can host 6 participants. The amount of particpants is limited to give you personalized support. Please register only if you are sure you can come on the day and time indicated. If something happens and you cannot come, cancel your registration as soon as possible. Please do not cancel last minute!

Requirement: General introduction

Make sure that you have attended the General introduction of the Makerspace before comming to the workshop. For more information see https://sph.ethz.ch/general-introduction.

Requirement: Lasercutter introduction

Make sure that you have attended the machine introduction and have recently used the Lasercutter at least once before comming to the workshop.

Check https://sph.ethz.ch/whats-on-at-sph?category=#introductions to find the upcoming machine introductions.

Preparation

- Think about what you want to engrave on the glass that you bring and for the glass that we provide: https://drive.google.com/file/d/1tPb6MT94v4EA7QhPii8adRsqN_uPYDkK/view?usp=sharing

- Make sure your designs/images are simple black and white (vector) drawings (no photorealistic images)

- Put your files on a USB-stick and bring it to the workshop

Please be aware that outside this workshop it is not allowed to engrave glass with the lasercutters.